|
Air Break Manually Star-Delta Motor Starter
Product Details:
X
Product Description
Air Break Manually Operated Star-Delta Motor Starter
Bentex - SKN Air Break Manually Operated star-Delta Motor starter type: SDM is ruggedly constructed, totally enclosed and is fixed in cast iron box for wall mounting. All incoming and outgoing terminals and conduit entries are easily accessible from top and bottom. An easy hinged cover, made of sheet metal completely encloses the system to ensure protection from dust and weather Each starter confirms to IS: 13947 Part 4 sec 1993
Installation
Connect starter terminal A1 B1 C1 and A2 B2 C2 to the corresponding motor terminals. Connect starter terminals L1, L2, L3 to incoming supply lines.
Operation
First move handle to start (star) position. When motor picks up speed then turn handle to RUN (Delta) position. Press Red knob to stop motor.
Reverse Rotation
Interchange any two incoming supply lines.
Overload Protection
Overload Protection is provided by means of a triple pole thermal relay in all the starters. The tripping is Electrical three overload relays for complete protection against overload and single phasing. No volt coil to ensure positive action even with a fading voltage.
Advanced Features
Bentex - SKN Air Break Manually Operated star-Delta Motor starter type: SDM is ruggedly constructed, totally enclosed and is fixed in cast iron box for wall mounting. All incoming and outgoing terminals and conduit entries are easily accessible from top and bottom. An easy hinged cover, made of sheet metal completely encloses the system to ensure protection from dust and weather Each starter confirms to IS: 13947 Part 4 sec 1993
Installation
- Assemble handle, which is packed separately with the action rod of the starter.
- Mount the stater on a vertical plane.
- Open cover and remove the cotton tape from the core. Clean throughly and check for any transit damage.
- Check the free movement of action Rod and handle.
- Make electrical connection as per wiring diagram ensuring that the correct size of cables are used and all the connection are tight.
- Make sure that earthing of the starter is done properly.
Connect starter terminal A1 B1 C1 and A2 B2 C2 to the corresponding motor terminals. Connect starter terminals L1, L2, L3 to incoming supply lines.
Operation
First move handle to start (star) position. When motor picks up speed then turn handle to RUN (Delta) position. Press Red knob to stop motor.
Reverse Rotation
Interchange any two incoming supply lines.
Overload Protection
Overload Protection is provided by means of a triple pole thermal relay in all the starters. The tripping is Electrical three overload relays for complete protection against overload and single phasing. No volt coil to ensure positive action even with a fading voltage.
Advanced Features
- Every starter tested to high degree of accuracy and is calibrated to the strict tolerances.
- Precision Ground laminations for silent operation with each lamination individually rust protected.
- Vacuum impregnated coil.
- Heavy duty electrolytic copper contacts contribute to long mechanical and electrical life.
- Accelerated tripping under single phase conditions.
- Ambient temperature compensation -5ºC to + 40ºC.
- Simple adjustment of current settings.
| Type | Relay Range | H.P. |
| SDM 3 | 4-6.5 A | 3 |
| SDM 5 | 6-10 A | 5 |
| SDM 7.5 | 9-14 A | 7.5 |
| SDM 10 | 13-21 A | 10 |
| SDM 12.5 | 13-21 A | 12.5 |
| SDM 15 | 20-32 A | 15 |
| SDM 20 | 25-35 A | 20 |
| SDM 25 | 32-42 A | 25 |
| SDM 30 | 38-48 A | 30 |
Other Products in 'Motor Starter' category
Contact Details
MAHADEV TRADING CORPORATION
Door No-234, Shantaveeraiah Lane, Chickpet, Near Vijya ViharBengaluru - 560053, Karnataka, India
Key Personnel
Mr. P. Dilip Kumar
(Partner)
Send Inquiry|
|
|
 |
MAHADEV TRADING CORPORATION
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |
